TCS have a wide range of vapour proof and breathable coatings to treat
slabs prior to the application of moisture sensitive materials eg hardwoods and laminates.
TT Vapour Membrane
TCS have a system which will create a vapour barrier by applying 2 coats of TT Vapour Membrane to a previously cleaned concrete surface which, once cured, provides a Vapour proof, Methane and Carbon Dioxide barrier.
We can retro apply Triton TT Vapour Barrier
as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an
alternative to sheet membranes in new construction.
Trimol 40 = NO NEED TO REPLACE DAMP CONCRETE SLABS!
Our Water Based two part Epoxy Coating is a two part primer and top coat system which will provide a damp proof finish on damp concrete.
We do not have vapour phase problems as it is water based and is safe to use in confined spaces.
Trimol 40 can be used as a damp proof membrane where none exists or the original has failed,
or as a tanking layer in a "sandwich" construction between sand and cement renders.
Trimol 40 is vapour permeable.
It is also suitable for use as a durable and walkable finish.
If requested we can apply a non slip coating during the application process. Trimol 40 can be applied to most building substrates and to damp surfaces. When fully cured, Trimol 40 resists petrol, oil and mild chemicals.
Triseal Vapour Barrier is our Damp proof membrane and water vapour suppressant and therefore not vapour permeable.
Again a solvent free, two part epoxy resin coating, typically used as a surface damp proof membrane and a water vapour suppressant which is well suited for use as a water and water proof barrier, beneath raised access floors, in plant rooms and bunded areas. It is also suitable for application on damp surfaces, such as sand/cement and cement floors subject to rising damp or containing residual construction moisture.
We have applied Tri-Seal as a general purpose coating for surfaces subject to foot and light wheeled traffic.
We prefer to wait 7 days for a new concrete slab to cure prior to application.
Triton SBR latex.
TCS use Triton SBR as a latex admixture in our cementitious mixes, renders, screeds and waterproof slurry coatings. We believe that Triton SBR improves the workability and durability of our cement mixes, resulting in the cured material having a higher strength, density and water impermeability.
A sheet membrane which is vapour proof and is designed to add a shock cushioning and sound
deadening improvement to any floor it is loose laid to prior to floating timber floors or
laminates being applied over.
It can be applied to new slabs a soon as they are walkable thus saving valuable time not having to wait for a
slab to be dry enough to lay moisture sensitive materials over.
ALL OUR VAPOUR PROOF FLOOR SYSTEMS COME WITH A 10 YEAR GUARANTEE.
Contact our sales office for further information or a site visit.