-- 4 measuring inputs for sensors and incremental encoders
-- 2 speed-controlled outputs for pumps and valves
-- control of middle range solar thermal plants with up to 2 collector arrays or 2 tanks
-- 15 pre-defined hydraulic systems; additional systems on request
-- installation and service wizard for easy handling
-- innovative operation and visualization conce .
RRP (ex VAT): Starting at: Price Unavailable
One bag contains the following items
4 x 3/4" BSP nuts suitable for fitting to DN16 solar pipe
4 x Nut retaining clips
4 x Fiber washers .
10 & 20Liters
Specially formulated anti-freeze premix
Based on propylene glycol blended with corrosion inhibitors and ultra pure water
This premix is biodegradable with 90\% degradation taking place over the first 30 days. Will offer protection down to -20ºC
Non volatile and non hazardous
Non toxic to humans and animals.
Protection down to -20ºC
Temperature range -20ºC t .
200mm Stainless Steel Roofing Bolt, for fixing to roof rafter.
1 x A2 Stainless Steel Bolt M8& M10, 200mm Long
1 x Solid Neoprene Seal 25mm
3 x M8 & M10 Stainless Steel Washer Nut for fixing the solar collector.
The wood screw section features an extra deep screw thread for secure fixing and an extended 100mm M8 &M10 threaded section for collector positioning.
Twin line pumping group for solar systems
Main technical data
Power Consumption?< 4W
Range of collector temperature measuring?-10?200?C
Range of tank temperature measuring?0?100?C
Suitable power of pump:4pcs,< 600W
Suitable power of electrical heater:1pc,<1500W
1.Main menu DT O & DT F Temperature difference function
2.Main menu-THET timing heating
3.TEMP Temperature main menu
4.EM Emergency collector temperature
?emergency switch-off temperature of collector?
5.CMX Maximum limited c .
Solar Pipe Mini Cone Flashing - 5-50mm
Mini cone for flashing solar pipes coming through roof,
Rubber booth can be cut down to suit pipe diameters between 5mm and 50mm
silicone pipe flashing suitable for either slate or tile roof.
High Temperature Silicone
Pipe Size 0 to 50mm diameter
100Mtr Single Tube DN16 on the roll
Tube Internal Dimension 16.3mm ± 0.3mm
Tube External Dimension 21.4mm ± 0.3mm
Stainless Steel AISI 316L (DIN 17441)
Highly Flexible, Tight Bend Radius,
Hose Temperature Range -270ºC to +600ºC
Working Pressure 16 Bar
Can be cut to length on site .
A total of 16 data, Is divided into 2 , Prev page 【