Promat Spray - Products for the Construction Industry

By: Promat Spray  05/12/2011
Keywords: steel, construction industry, fire protection

Promat has developed, for the construction industry, a wide range of fireproofing systems that restricts the effects of cellulosic fire on building elements and whole structures.  In addition, complementary systems are also available to improve the thermal and acoustic performance of structures.

These system incorporate product groups that include spray or trowel applied coatings, intumescent paints,  adhesives/keycoats, topcoats/sealers and reinforcement/fixings.

Cafco BLAZESHIELD®

Cafco BLAZESHIELD® is a spray applied single package factory controlled premix, based on a mixture of mineral wool and cement binders, for internal use.

Cafco BLAZESHIELD® is a durable, lightweight coating that offers fire protection for up to 240 minutes.

 

Cafco BONDSEAL®

Cafco BONDSEAL® is a single pack, polyvinyl acetate copolymer, used as an adhesive/sealer coat prior to the application of some of the Promat's spray applied material.

Cafco BONDSEAL® is mixed with water and applied to porous or non compatible surfaces to either seal or create a barrier prior to the application of Promat's spray applied products.

A wide range of surfaces will benefit from the use of Cafco BONDSEAL®.

 

CAFCO® 300

CAFCO® 300 is a spray or trowel applied, single package factory controlled premix, based on vermiculite and gypsum, for internal use.

CAFCO® 300 is a lightweight coating that provides very efficient fire resistance with minimal thickness to steel and concrete frames, metal floor and roof decks, and to return air plenums. Building types that will benefit from the use of CAFCO® 300, include a wide range of educational, leisure and entertainment centres, and commercial projects.

 

PROMASPRAY® T

PROMASPRAY® T is a spray applied mineral wool material for the thermal insulation of steel decks and concrete.

PROMASPRAY® T consists of mineral wool coated and bound together with inorganic binders. The product is applied by specialist contractors using an airless spray pump directly on to the substrate. PROMASPRAY® T  is designed for use on concrete substrates and composite floor decks.

Contact Promat for further information.

Cafco MANDOLITE® CP2

Cafco MANDOLITE® CP2 is a spray applied, single package factory controlled premix, based on vermiculite and Portland cement, for internal use.

Cafco MANDOLITE® CP2  produces a monolithic coating able to withstand the thermal shocks experienced in a high intensity cellulosic fire. Concrete structures in particular, will be protected from explosive spalling when coated with Cafco MANDOLITE® CP2.

 

CAFCO® SBR Bonding Latex

CAFCO® SBR Bonding Latex is a single pack, synthetic latex, used as a keycoat for fire protective coatings. It is spray applied after first mixing with Cafco MANDOLITE® HS3.

CAFCO® SBR Bonding Latex forms part of the Cafco MANDOLITE® CP2 and Cafco MANDOLITE® HS3 passive fire protection systems, and is designed for application to primed steel or concrete substrates.

 

Cafco SPRAYFILM® WB3

Cafco SPRAYFILM® WB3 is a water-based intumescent coating consisting of polyvinyl acetate resins and fillers for the fire protection of structural steel.

Cafco SPRAYFILM® WB3 is preferably spray applied directly to the contour of primed 'I' and 'H' section columns and beams, and hollow sections, to provide fire protection for up to 120 minutes. In a fire, a chemical reaction takes place, causing product to expand and form an insulating layer which prevents the temperature of steel rising to a critical level. 

 

Cafco SPRAYFILM® WB2

Cafco SPRAYFILM® WB2 is a water based intumescent coating consisting of polyvinyl acetate resins and fillers for the fire protection of structural steel. It can be sealed and protected with a decorative top coat.

Cafco SPRAYFILM® WB2 is applied directly to the contour of primed I and H-section columns, angles, channels and beams, and hollow sections, to provide fire protection for up to 120 minutes. In a fire, a chemical reaction takes place, causing the Cafco SPRAYFILM® WB2 to expand and form an insulating layer which prevents the temperature of the steel rising above a critical level.

 

CAFCO® TOPCOAT 200

CAFCO® TOPCOAT 200 is a single pack, water based acrylic polymer for use as a water vapour permeable topcoat with excellent adhesion. It may be applied by spray, roller or brush. CAFCO® TOPCOAT 200 is applied over vermiculite and Portland cement-based fire resistant coatings that protect steel and concrete substrates.

CAFCO® TOPCOAT 200 does not blister when used on these substrates. CAFCO® TOPCOAT 200 may also be used on masonry, brickwork and blockwork, whether dry or damp and protects against ingress from salt spray, washdown water, chemical spills, rainfall and sprinkler deluge systems. It is flexible, flame retardant, mould resistant, and helps reduce the carbonation rate of cement based products.

 

CAFCO® PSK 101

CAFCO® PSK 101 is a single pack, multi purpose synthetic latex, water based emulsion for use as a sealer and keycoat as a component of the Cafco FENDOLITE® integrated fire protective coating system.

CAFCO® PSK 101 is suitable for on site or off site application to construction elements such as steel or concrete sections and metal decks.

Onshore oil and gas, petrochemical and power industries will benefit from the use of CAFCO® PSK 101.

 

CAFCO® 400

CAFCO® 400 is a Portland cement based, spray applied fire resistive material. It is a medium density wet mix product designed to provide fire protection for structural steel in commercial and high rise construction.

The durable surface of the product makes it well suited for application in areas which may be subjected to higher levels of abuse.

Keywords: Airless Spray, Composite Floor, concrete structures, construction industry, fire protection, fire resistance, Floor And Roof, leisure and entertainment, Lightweight Coating, mineral wool, Polyvinyl Acetate, Specialist Contractors, Spray Pump, steel, Steel Decks, thermal insulation,

Other products and services from Promat Spray

05/12/2011

Promat Spray Passive Fire Protection Products for the Construction, Hydrocarbon & Tunnelling Industries

Promat has developed, for the construction industry, a wide range of fireproofing systems that restricts the effects of cellulosic fire on building elements and whole structures. The system incorporate product groups that include spray or trowel applied coatings, intumescent paints, boarding, adhesives/keycoats, topcoats/sealers and reinforcement/fixings.


05/12/2011

Promat Spray - Products for the Petrochemicals Industry

CAFCO® PSK 101 is a single pack, multi purpose synthetic latex, water based emulsion for use as a sealer over alkali sensitive primers or a keycoat and may be applied by spray, roller or brush. Cafco FENDOLITE® TG will not fail after the prescribed regulatory fire resistance period but will continue to afford a predictable measure of protected for the duration of the fire.


05/12/2011

Promat Spray Products for Tunnels - World Class Coating Systems

Promat has developed, for the tunnels industry, a range of integrated coating systems that restrict the effects of cellulosic hydrocarbon fires on tunnel structures, and improves the sound absorption performance on linings. Cafco FENDOLITE® TG will not fail after the prescribed regulatory fire resistance period but will continue to afford a predictable measure of protected for the duration of the fire.