Steel Storage, Dished Ends, Spinnings Manufacturer - totallyenclosedbundedtanks

By: Kingspan Gsp  05/12/2011
Keywords: tanks, roller shutter, Fuel Management

Totally enclosed bunded tanks are secure units – all fill points are contained in a lockable fill cabinet.

These tanks come with a lockable bund hatch as standard and with the option of a pump house, complete with roller shutter door. These units can be supplied with pumps, flow meters and auto shut-off nozzles on request. All tanks are pressure tested prior to dispatch. They can have top or bottom outlets, with a manual shut-off valve accessible through the bund hatch. There is less site preparation and no need to build a concrete bund or support walls. The tanks must be positioned on a solid level concrete base.

Bunded tanks are also available for the storage of biofuels, biodiesel, PPO Pure Plant Oil, and E85.

Standard fittings as follows:

Bunded Rectangular Tank

  1. 50mm BSP fill c/w lever valve and camlock coupling (80mm on units over 35,000 litres)
  2. Tank vent / overflow
  3. Bund inspection hatch
  4. 50mm spare sockets on bund e.g. for bund alarm, gauge etc.
  5. 50mm BSP top connection for drain c/w plug
  6. 50mm top or bottom outlet depending on installation
  7. Lifting lugs
  8. Bund bearers
  9. Fill hatch built into bund as standard on tanks over 1,250mm high
  10. 600mm diameter manlid fitted on all tanks over 30,000 litres
  11. Units finished: Red Oxide

Optional Extras:

Bunded Cylindrical Tank

  1. Overfill / bund alarm
  2. 50mm overfill prevention valve
  3. Pumphouse complete with roller shutter door
  4. Pump mounting platform
  5. Dispensing pumps and fuel management systems
  6. Fuel management system brackets
  7. Gauging systems

Paint finishes ranging from 5-20 Gauranteed finish.

Keywords: Bunded Tanks, Fuel Management, Lifting Lugs, Red Oxide, roller shutter, Roller Shutter Door, shutter door, tanks,

Contact Kingspan Gsp

Email - none provided

Print this page

Share

Other products and services from Kingspan Gsp

05/12/2011

Steel Storage, Dished Ends, Spinnings Manufacturer - products

GSP also provides the customer with a complete technical advisory service in relation to tank siting, installation and conformance to the DSA regulations. GSP offers the market a wealth of experience and knowledge gained through product development and manufacturing experience. With reducing agent to convert harmful nitrogen oxides into innocuous nitrogen and water. A compact fuel dispensing tank, ideally suited for the construction industry.


05/12/2011

Steel Storage, Dished Ends, Spinnings Manufacturer - dishedends

Dished and flanged ends are used in the agricultural industry to manufacture slurry tankers and in the oil industry for overground and underground oil tanks. They are made from 5mm and 6mm carbon steel.


05/12/2011

Steel Storage, Dished Ends, Spinnings Manufacturer - sitemaster

The GSP SiteMaster is a compact fuel dispensing tank, ideally suited for the construction industry for refuelling plant machinery on-site with the added security of a steel roller shutter door. The tank comes complete with pump, flow meter, 4meter hose, auto shut off nozzle and overfill bund alarm with the optional extras of a contents gauge and telemetry. 50mm Fill pipe with camlock vapour tight tanker connection located in pump cabinet.


05/12/2011

Steel Storage, Dished Ends, Spinnings Manufacturer - overground storage tanks

These supports are positioned 1/4 of the tank diameter from either end and have a bearing surface of 1/3 of the tank circumference. Overground tanks have the option of steel support cradles (2 or 3 depending on the size of the tank). Kingspan GSP offers a complete range of cylindrical overground tanks in both dished and flat ends. Please refer to the data charts for our full range of sizes and specifications.


05/12/2011

Steel Storage, Dished Ends, Spinnings Manufacturer - double skin underground storage tanks

The manhole chamber is completed and the surrounding area is topped up with hard core and a reinforced concrete slab at ground level is poured. Double skin underground storage tanks have an internal shell manufactured from 6mm steel and an external shell manufactured from 4mm steel. They are supplied with DSA 3-suction 600mm diameter manlid with double tapered sockets and malleable iron plugs.