Fencing Posts, Panels and Gates

Fencing Posts, Panels and Gates from Double L Concrete & Granite Products

By: Double L Concrete & Granite Products  21/03/2011
Keywords: fencing

Concrete base panels can be used for entire walling project or used as a base for a timber fence to sit on top. They come in one size which is 1800x300x50

Rock face base panels are used most often in a base panel wall. This is where concrete panels are used for the entire wall. The rock face panel is moulded to give a more stone like appearance to the wall but without the cost of building a stone wall.

Concrete chain link fencing posts are made in two standard sizes 1950mm(6\'6\") or 2550(8\'6\"). We also provide a straining post for corners and also the struts which are used to support the strainer. If you have any more queries on this just call our office and one of our sales staff will be happy to help.

Our concrete gate post is 2400x150x150 reinforced post which will carry a gate of up to 500kg.

We Supply & Fit standard side gates or we can make a custom gate to suit your needs.

Round top hit & miss panels are ideal for an economical solution to a high quality sturdy fence. The idea behind the staggered boards is to allow strong winds to penetrate the fence without causing excessive force on the fence thus preventing damage to your wall during heavy storms and extreme weather.There are two finished available, dipped and pressure treated. Dipped panels are brown in colour and have an should last approximately 3 years before retreatment is required. Pressure treated timber is green in colour and should last approximately 5 years before retreatment is required.

Shiplap panels are an ideal economical solution to your fencing requirements.

Keywords: fencing

Contact Double L Concrete & Granite Products


Print this page