Chatillon Digital Force Gauge stands

By: Inspection Equipment  05/12/2011

Chatillon Digital Force Gauge stands

Features  

The Chatillon® TCD225 Series is an advanced force testing system optimized for production, quality control and engineering applications.
The TCD System consists of a powerful, yet easy-to-use console; a rugged frame with high performance, closed-loop motion control; and an intelligent load sensing system with measuring accuracies better than 0.1% full scale.
The TCD console features a high resolution colour graphical display featuring menus, function and numeric keys and status indicators that assist the user in setup, operation and analysis.
Information may be displayed in large-format tabular and graphical formats for easy viewing.
The frame operates from 0.001 to 50.0-inches per minute (0.01 to 1270 mm/minute) and employs an advanced closed-loop PID controller for precision travel (accuracy better than 0.25% unloaded), ideal for applications such as spring testing where exact distance control is required.
The TCD System permits the user to measure heights based on a datum or absolute position. Deflection compensation is standard.
Standard test setups for load limits, distance limits, time limits, break tests, rupture tests, cycling and loop tests are included.
No Computers. No Software. No Compromises. Force Capacity
225 lbf (1 kN) Features
Advanced, Simple to Use Test Setups that You Create Graphically
- Limit Testing (Load, Distance, Time)
- Break & Rupture Testing
- Cyclic & Loop Testing (Time or Count)
- Multi-Stage/User Defined Testing per ISO and ASTM Specifications
- Open Architecture Does not require computers or proprietary software applications!
Use for Height Measurement
- Ideal for Accurate Spring Testing
Advanced Operator Interface based on Metronics Gauge Chek Architecture
- Simple Operation with Templates, Menus & Prompts
- Tabular & Graphical Results including embedded SPC
Data Acquisition at full 1000 Samples per Second (user-selectable to 1to 1000Hz)
- Save Data to USB Drive
- Direct Import into Excel or other OLE2
Compatible Applications
Ultimate Security
- Save Tests and Operate from USB Flash Drive
- Create Tests and Upload into Production Machines
- Use Bar Code Scanner to Automatically Call a Test for the Authorized User
- Save and Transfer Raw Data, Results, Test Setups using USB Flash Drive Specification
Measurement Accuracy: Better than 0.1% Full Scale
Speed: 0.001 to 50 in/min (0.02 to 1270 mm/min)
- Independent Speeds for all stages within a Test Setup
Load Measurement System
Chatillon TLC Series Load Cells
- Automatic Sensor Recognition
- Overload History Reporting


Contact Inspection Equipment

Email

Print this page

Share

Other products and services from Inspection Equipment

05/12/2011

Mitutoyo 12'' / 300mm Optical Comparator

Functions: Zero set, ABS/INC Switching Projection Lens 10 x StandardContour Illumination Optical System: Telecentric Light Source: Halogen bulb Optical System: Telecentric Light Source: Halogen bulb Surface Illumination Optical System: Vertical illumination by 1/2 mirror.


05/12/2011

Heidenhain Probes & Displays

Certo length gages are especially well suited to tasks such as gage-block inspection & calibration, small-diameter Specto length gages are typically used in multi-point inspection and position measurement. The similarly compact Metro length gages are for higher accuracy applications.