MF / Grid Ceilings in the West of Ireland

By: O'connell Drylining  05/12/2011
Keywords: Ceilings, Plasterboard, Grid Ceilings

MF Ceilings

An MF ceiling is where plasterboard is fixed to a concealed metal grid which is in turn then fixed to a structural soffit above. This therefore creates a void (of a depth to suit the structure) above the ceiling which can be used for services etc. The plasterboard can then be finished using the taping and jointing system if required. The type of plasterboard used can be designed to enhance particular fire, acoustic and thermal requirements.

MF Bulkheads

The same MF system can be used to create feature bulkheads in ceilings. These can be constructed purely in an aesthetic context to create dropped levels in ceilings, to create curved features or other specific design concepts such as coffers. Alternatively these can be built around and hide services such as air conditioning units and light fittings.

Grid Ceilings

Grid ceilings consist of tiles hung within a metal grid system. There are many different tile types and styles available to suit each development and advice can be given in respect of these.

Keywords: Ceilings, Grid Ceilings, Plasterboard, taping and jointing

Other products and services from O'connell Drylining


Plasterboard/Partitions/Wall Linings in the West of Ireland

These can be constructed to a height of 7.90m and are single or doubled boarded each side with a plasterboard type to suit any individual requirement. As an alternative to traditional plastering, this system allows for a much quicker installation time as it is a completely dry system. Metal stud partitions are non-loadbearing internal partitions suitable for all types of housing.


Insulation in the West of Ireland

Termex insulation materials are manufactured from clean newspaper where vegetable-oil-based natural pigments have been used for ink. These can be used in metal stud partitions, above MF or grid ceilings or between joists, purlines and rafters in domestic houses. We will be pleased to advise with regard to the suitability and applicability of the differing insulation types.


Taping And Jointing in the West of Ireland

The jointing process has three application stages - bedding the tape and bulk filling the joint, secondary filling to take up shrinkage and then final finish. Taping and jointing produces a smooth, continuous, crack free surface ready for final decoration.


Eurobead in the West of Ireland

When Eurobead is installed on new build dwellings it is completed prior to internal plastering and on existing dwellings can be carried out at any time. The bead is coated in an air drying adhesive which enables the bead to flow freely through the cavity ensuring a full fill of the cavity wall. The Insulation Technicians follow a strict drilling pattern set out by the Irish Agreement Board to insure all areas of the cavity if filled.


Eurofoam in the West of Ireland

EuroFoam is a spray applied foam insulation that expands 100 times its initial volume, to fill every crevice, virtually eliminating air leakage, convection and airborne moisture movement. New Build Timber Frame Houses· Residential homes· Industrial buildings· Commercial Buildings· Agricultural Projects.