Fuel Cleaning and Filtration - Fleury Engineering, fuel filtration & cleaning, Cork, Ireland

By: Fleury  05/12/2011
Keywords: oil, Fuel, tank

With over 10 years experience in the oil industry, Fleury Engineering are pioneers in the fuel filtration and cleaning business here in Ireland.

We have a fleet of machines which we use to tackle a range of jobs from small vehicle tanks of 50 litres right up to bulk storage tanks of 10,000 tonnes.

In order to meet the specific demands of the Irish market we designed and built our own Mobile Fuel & Oil Filtration unit.

This unit can process upto 20 tonnes per hour while removing water and contamination. The unit uses filters as fine as 1 micron to enusre your fuel is on spec after we have finished.

We hire mobile cleaning/polishing rigs which continuously circulate and clean fuel/lubricant in a “kidney loop”. This is achieved by pumping oil from the storage tank, through filters/separators and back into the tank.

All contaminants are removed and the process cleans the tank and its contents at the same time. We can also fit permanent onsite fuel/lubricant cleaning units. We also provide in-line hydrocarbon cleaning products and services - see


For treatment of diesel bug and tank cleaning, see

Keywords: Bulk Storage, Contamination, Fuel, Fuel Filtration, oil, Oil Filtration, Removing Water, tank,

Other products and services from Fleury


Fleury Engineering, fuel filtration & cleaning, Cork, Ireland - services

Fleury Engineering can meet your needs when it comes to the filtration of fuel or oils or their separation from water - whether it’s supply, consultation, a turnkey project or a complete service contract. We can help you prevent fuel contamination in the first place – whether it’s a polishing filter or a complete fuel storage and management solution. We can provide a comprehensive service to meet your bulk storage / storage tank needs.


Fleury Engineering, fuel filtration & cleaning, Cork, Ireland - products

Gravimetric oil - water interceptors and grease traps reduce the amount of fats, oils and greases that enter the waste water treatment system in a simple and efficient manner. C.C.JENSEN A/S designs and manufactures CJC Offline Oil Filtration Systems for removal of particles, oil degradation products and water from oil and other fluids.


Oily Water Separation - Fleury Engineering, fuel filtration & cleaning, Cork, Ireland

Ships, where oily water separators are used to separate oil from the bilge water, as required by the international MARPOL Convention. Fats, oils and greases can pose major challenges to effective sewer management if they enter the wastewater treatment system. We can provide systems to separate any combination of fats, oils, grease and solids from water to any degree of separation.