Owl Electricity Monitor

By: Purchase.ie  10/01/2011
Keywords: Sustainable Energy, energy saving, Home Energy Saving

With an owl wireless electricity monitor installed you are more aware of your electricity usage all the time. The unit provides up to the second information on the amount of electricity you are using in Euro or KWh. You will thus instantly see the financial benefit of turning off electrical devices and saving money.

Features and Benefits of the Owl Electricity Monitor
- With an owl wireless electricity monitor installed you are more aware of your electricity usage all the time. The unit provides up to the second information on the amount of electricity you are using in Euro orKWh. You will thus instantly see the financial benefit of turning off electrical devices and saving money.  
- The unit Displays but a real time cost or KWh and displays a running accumulative cost or KWh.  
- Whether it’s turning off at the plug rather than just using standby or simply turning off a light, the OWL Electricity monitor will show you how changing your behaviour can save you money and so help the environment.        
- It is easy to install, easy to read and easy to use.  
Using your Owl Electricity Monitor What’s in the box  
• Display Unit  
• Transmitter unit with attached sensor
• 4x AAA Batteries  
• User Manual  
Synchronising the Display and Transmitter  
1. Remove the battery cover from the backof the transmitter  
2. Insert 2xAAA batteries into the batterycompartment ensuring that the batteriesare the correct orientation.  
3. Press the reset button in the Transmitterbattery compartment.  
4. Press and hold the Check key in the Transmitterbattery compartment until the Red light starts toflash slowly  
5. Remove the battery cover from the base of theDisplay.
6. Press and Insert 2xAAA batteries into the batterycompartment ensuring that the batteries are thecorrect orientation.
7. Press the reset button on the back of the Display.  
8. Replace the battery cover of the Display  
9. Replace the battery cover of the Transmitter  

Connecting the Sensor
1. Locate your electricity supply cables between your meter & consumer unit (fusebox).  
2. Fit the sensor clip over the insulated Live cable running into the meter (furthest left cable) or runningout from the meter (furthest right cable). Note the sensor clip can be fitted anywhere along the live cable from the meter to the consumer unit.  
3. At no time should force or undue pressure be applied to any wiring or connections.  

Further information is available in the user manual.   If unsure of any aspect on installation process please call us on 01 8428187 or contact a qualified electrical contractor for advise.

Keywords: eco friendly products, energy saving, Home Energy Saving, Sustainable Energy