SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

By: Klb Resins  05/12/2011
Keywords: commercial flooring, Industrial Flooring, Polyurethane Mortar Coating

SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

Screeds

For ease of use we have divided screeds into two groups i.e. High Impact Resistantand High Impact - High Temperature.

Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.

Screeds - High Impact Resistant - 6mm

KLB EP 150 is a low-viscosity epoxy-resin for producing decorative reaction resin coatings using coloured and natural sand. EP 150 is an easy to apply mortar system. Due to its special composition, the resin has low yellowing properties and is especially suitable for decorative mortar coatings. In addition, it can be used to produce base-coats, levelling coats and scratch-coats.

  KLB EP 99 is a formulated, 2-component epoxy-resin binding agent that combines with aggregates to produce an economical coating for industrial and commercial flooring. The product is mixed on site with graded aggregates for the particular application and coating thickness. Since it is supplied as a filler-free binding agent, the product can be economically extended with the desired aggregate. Mixing allows easy application using a rake and produces coating of very high technical quality.

Screeds - High Impact - High Temperature

KLB PU 4009 is a high-quality, 3-component, polyurethane mortar coating that can be applied by rake and is for heavy-duty coatings that are exposed to hot water and chemicals. Therefore, KLB PU 4009 is primarily used in the food industry, e.g. production areas in breweries, dairies, abattoirs, butchery departments, etc. and also in areas where chemicals are used.

KLB PU 4006 is a high-quality, 3-component, polyurethane mortar coating that can be applied by rake and is for heavy-duty coatings that are exposed to water and chemicals. Therefore, KLB PU 4006 is primarily used in the food industry and also in areas where chemicals are used.

KLB PU 4012 is a high-quality, low-slump, 3-component, polyurethane mortar coating for flooring that is resistant to chemicals and to hot water. KLB PU 4012 is a system product that is used to complement KLB 4006, 4009 and PU 4010 Grip when forming straight and coved plinths and skirtings. Itis therefore primarily used in areas the food industry where there is high exposure to wetting and hot water, e.g. in production areas in breweries, dairies, abattoirs, butchery departments, etc. and also in other areas with high exposure to chemicals.

Keywords: commercial flooring, Industrial Flooring, Polyurethane Mortar Coating

Other products and services from Klb Resins

05/12/2011

CLEAR SEALERS « KLB Resins - Commercial flooring - Industrial flooring

It produces a uniform, silk-matt surface finish that gives the coating a consistent appearance as the “reflection effect” of gloss coatings from light dispersion is completely eliminated. KLB EP 700 E Matt is a 2-component epoxy resin emulsion that can be thinned with water and contains only a very small quantity of solvent for reasons of quality improvement.


05/12/2011

REPAIR MORTARS « KLB Resins - Commercial flooring - Industrial flooring

The use of EP 51 RAPID S offers considerable time savings in small areas and in renovation work with short installation and setting times. KLB EP 51 RAPID S is a solvent-free, 2-component epoxy resin that cures at low temperatures and, at normal temperatures, cures rapidly. Introduction of dried quartz up to 0.3mm will give a fine finish whereas dried quartz up to 3.0mm will give a coarse finish.


05/12/2011

LEVELLING SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

The conductive property ensures protection against explosion whereby the product is especially suitable for production areas in the chemicals and pharmaceuticals industries, in laboratories, and also in other manufacturing with high exposure to chemicals.


05/12/2011

COATINGS « KLB Resins - Commercial flooring - Industrial flooring

The product will withstand forklift-truck traffic and has very good resistance to chemicals and is resistant to solvents, motor fuels, oils, mineral acids, alkalis and salts, etc. KLB EP 216 Universal is a universal, solvent-free, pigmented 2-component multi purpose binder based on epoxy resin for hard industrial coatings.


05/12/2011

PRIMERS « KLB Resins - Commercial flooring - Industrial flooring

As a variant of the proven special resin primer EP 52, the product is rapid setting and combines good adhesion and wetting properties with early readiness for over-coating after only 4 - 6 hours. KLB EP 30 is an unfilled, low viscosity and colourless epoxy-resin for producing primers, scratch coats and thick-coat smoothing compounds.