REPAIR MORTARS « KLB Resins - Commercial flooring - Industrial flooring

By: Klb Resins  05/12/2011
Keywords: commercial flooring, Industrial Flooring, renovation work

REPAIR MORTARS « KLB Resins - Commercial flooring - Industrial flooring

Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.

KLB EP 51 RAPID S is a solvent-free, 2-component epoxy resin that cures at low temperatures and, at normal temperatures, cures rapidly. It is used as a primer and smoothing coat in cases where a fast coating installation is required.

EP 51 RAPID S can usually be over-coated after 2 - 4 hours and has, therefore, a great time advantage over other primers. The use of EP 51 RAPID S offers considerable time savings in small areas and in renovation work with short installation and setting times. EP 51 RAPID S cures reliably even at temperatures down to 0°C and this is a considerable advantage in the colder seasons of the year.

Introduction of dried quartz up to 0.3mm will give a fine finish whereas dried quartz up to 3.0mm will give a coarse finish.

Keywords: Coating Installation, commercial flooring, Considerable Time, Epoxy Resin, Industrial Flooring, renovation work,

Other products and services from Klb Resins


CLEAR SEALERS « KLB Resins - Commercial flooring - Industrial flooring

It produces a uniform, silk-matt surface finish that gives the coating a consistent appearance as the “reflection effect” of gloss coatings from light dispersion is completely eliminated. KLB EP 700 E Matt is a 2-component epoxy resin emulsion that can be thinned with water and contains only a very small quantity of solvent for reasons of quality improvement.


SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

KLB PU 4009 is a high-quality, 3-component, polyurethane mortar coating that can be applied by rake and is for heavy-duty coatings that are exposed to hot water and chemicals. KLB EP 99 is a formulated, 2-component epoxy-resin binding agent that combines with aggregates to produce an economical coating for industrial and commercial flooring.


LEVELLING SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

The conductive property ensures protection against explosion whereby the product is especially suitable for production areas in the chemicals and pharmaceuticals industries, in laboratories, and also in other manufacturing with high exposure to chemicals.


COATINGS « KLB Resins - Commercial flooring - Industrial flooring

The product will withstand forklift-truck traffic and has very good resistance to chemicals and is resistant to solvents, motor fuels, oils, mineral acids, alkalis and salts, etc. KLB EP 216 Universal is a universal, solvent-free, pigmented 2-component multi purpose binder based on epoxy resin for hard industrial coatings.


PRIMERS « KLB Resins - Commercial flooring - Industrial flooring

As a variant of the proven special resin primer EP 52, the product is rapid setting and combines good adhesion and wetting properties with early readiness for over-coating after only 4 - 6 hours. KLB EP 30 is an unfilled, low viscosity and colourless epoxy-resin for producing primers, scratch coats and thick-coat smoothing compounds.