LEVELLING SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

By: Klb Resins  05/12/2011
Keywords: commercial flooring, Industrial Flooring, Epoxy Resin

LEVELLING SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.

is a high-quality, self-flow coating based on liquid, 2-component polyurethane resin. PU 410 is used to produce flexible floor coatings primarily in interior locations and with sound-absorbing and decorative properties. Itis used in areas in which good wear properties, comfort and pleasant appearance are required, such as in exhibition areas, offices and showrooms, hospitals, etc. Unlike the usual, industrial polyurethane coatings, PU 410 is made from light-fast raw materials and can be produced in light, decorative colours as the finished coating has excellent colour stability.

 KLB PU 420 ‘Comfort Floor (resin)’ is a self-flow, solvent-free, 2-component polyurethane coating for smooth, hard-resilient coatings and for slip-resistant scatter-coatings.

The material has good flow and smoothing properties and sets well with almost no shrinkage.

KLB EP 200 VF is a solvent-free, pigmented, self-flow coating based on 2-component epoxy resin with excellent flow and smoothing properties. Due to its good flow performance, coatings can be applied from 1.5 mm up to any desired thickness according to demand and with due regard to wear factors.

KLB EP 213 is a self-levelling, solvent-free, 2-component, epoxy-resin coating for a hard and smooth surface finish as well as mixed or scatter-coat finishes, ideally for use in industrial locations. The material has excellent flow, smoothing and setting properties EP 213 can be mixed with quartz sand, which is both beneficial and economical for thickness above 3 mm. EP 213, for a standard coating product, has excellent resistance to chemicals.

The hardened coating is suitable for use in commercial and industrial locations in which special demands are placed on decorative appearance. Available in four standard shades.

KLB EP 280 WHG is a solvent-free, electrically conductive and crack-covering, 2-component epoxy resin free-flow coating with excellent chemical resistance.

The coating is suitable for use in collection bays and areas, such as in production / handling areas and storage / packing areas that must be equipped with approved coating systems.

The conductive property ensures protection against explosion whereby the product is especially suitable for production areas in the chemicals and pharmaceuticals industries, in laboratories, and also in other manufacturing with high exposure to chemicals.

The product will withstand forklift-truck traffic. It also has good resistance to chemicals and is resistant to solvents, motor fuels, oils, mineral acids, alkalis and salts.

Colours: 12 standard RAL colours 

Keywords: Approved Coating, commercial flooring, Epoxy Resin, Industrial Flooring, smoothing, Surface Finish,

Other products and services from Klb Resins


CLEAR SEALERS « KLB Resins - Commercial flooring - Industrial flooring

It produces a uniform, silk-matt surface finish that gives the coating a consistent appearance as the “reflection effect” of gloss coatings from light dispersion is completely eliminated. KLB EP 700 E Matt is a 2-component epoxy resin emulsion that can be thinned with water and contains only a very small quantity of solvent for reasons of quality improvement.


REPAIR MORTARS « KLB Resins - Commercial flooring - Industrial flooring

The use of EP 51 RAPID S offers considerable time savings in small areas and in renovation work with short installation and setting times. KLB EP 51 RAPID S is a solvent-free, 2-component epoxy resin that cures at low temperatures and, at normal temperatures, cures rapidly. Introduction of dried quartz up to 0.3mm will give a fine finish whereas dried quartz up to 3.0mm will give a coarse finish.


SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

KLB PU 4009 is a high-quality, 3-component, polyurethane mortar coating that can be applied by rake and is for heavy-duty coatings that are exposed to hot water and chemicals. KLB EP 99 is a formulated, 2-component epoxy-resin binding agent that combines with aggregates to produce an economical coating for industrial and commercial flooring.


COATINGS « KLB Resins - Commercial flooring - Industrial flooring

The product will withstand forklift-truck traffic and has very good resistance to chemicals and is resistant to solvents, motor fuels, oils, mineral acids, alkalis and salts, etc. KLB EP 216 Universal is a universal, solvent-free, pigmented 2-component multi purpose binder based on epoxy resin for hard industrial coatings.


PRIMERS « KLB Resins - Commercial flooring - Industrial flooring

As a variant of the proven special resin primer EP 52, the product is rapid setting and combines good adhesion and wetting properties with early readiness for over-coating after only 4 - 6 hours. KLB EP 30 is an unfilled, low viscosity and colourless epoxy-resin for producing primers, scratch coats and thick-coat smoothing compounds.