CLEAR SEALERS « KLB Resins - Commercial flooring - Industrial flooring

By: Klb Resins  05/12/2011
Keywords: flooring, commercial flooring, Industrial Flooring

CLEAR SEALERS « KLB Resins - Commercial flooring - Industrial flooring

Clear Sealers

Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.

KLB PU 800 E Satin is a high qua­lity, colourless, 2-component polyurethane seal-coat that is used as a matt finish on epoxy-resin and polyurethane coatings. PU 800 E is based on a new, environment pro­tective technology, represents an excellent alternative to solvent-based seal products and can be used in a wide range of areas. Application is by mohair- or velour- roller using cross-strokes. Due to its very low solvent content, no expensive protective measures are required. Due to its drying performance, very consistent and “beautiful” sur­faces can be produced.

KLB EP 700 E Matt is a 2-component epoxy resin emulsion that can be thinned with water and contains only a very small quantity of solvent for reasons of quality improvement. EP 700 E is used as a matt top-coat seal on reaction resin coatings. It produces a uniform, silk-matt surface finish that gives the coating a consistent appearance as the “reflection effect” of gloss coatings from light dispersion is completely eliminated.

KLB EP 175 S is a high quality, 2-component epoxy resin preparation for clear seal-finishing on décor mortar and décor scatter coatings. EP 175S is used for top-sealing colours and scatter-coatings for use in slip-resistant wet areas such as, e.g. kitchens, abattoirs, fish and food industries. For trowel applied surface sealing and smoothing of décor and terrazzo flooring.

Application as a filler-sealer is completed in several applications. The product has little inherent colour and, with careful application, gives a visually uniform and good appearance. As the product is based on epoxy resin, it is possible to use it in areas where there is a demand for mechanical and chemical resistance. Surfaces are abrasion and wear resistant, hygienic and easy to clean. EP 175S has good colour stability.

KLB PU 881 EL+ [E.S.D. - antistatic] is a solvent based, 2-componepolyurethane seal with a silk matt surface finish. PU 881 EL+ contains solvents but has a high solids content. The product is used for producing uniform, matt surfaces on electrically conductive industrial and commercial flooring. Itis notable for its high covering power and uniform, streak-free application. The seal is always used in combination with conductive coatings, EP 200 EL+or PU 413 EL+.

The hardened seal is suitable for use in commercial and industrial locations where an antistatic or electrically conductive flooring is required. Thanks to the special conductive filler, very consistent conductive flooring can be produced that is especially suitable for use in the electronics or electro-technical industries.

Polyurethane Solvented - High Build - Very tough

FC Elastomer Kollerdur MO121 is a moisture-curing polyurethane resin based on Toluene diisocyanate. It is totally soluble and dilutable with xylene thereby eliminating the need to use expensive ester solvents. Kollerdur MO121/22%, a 22% NVC for immediate use. Kollerdur MO121/40% a 40% NVC for immediate use.

Crystal Clear [Matt & Gloss] - Brickwork & Timber

CRYSTAL CLEAR is a single pack water based polyurethane dispersion with an acrylic mix. It is completely non hazardous and as such is suitable for application in both internal and external applications and in small confined areas as well as larger, more exposed areas.

CRYSTAL CLEAR will adhere to most substrates and form to give a high gloss film. Once fully cured CRYSTAL CLEAR is hard wearing and offers good chemical resistance against a large number of aggressive chemicals.

CRYSTAL CLEAR can be used on concrete, stone, brickwork, wood and most traditional building materials, as well as on aluminium, brass, copper bright work and some plastics.

Keywords: commercial flooring, Epoxy Resin, flooring, Industrial Flooring, Surface Finish

Other products and services from Klb Resins

05/12/2011

REPAIR MORTARS « KLB Resins - Commercial flooring - Industrial flooring

The use of EP 51 RAPID S offers considerable time savings in small areas and in renovation work with short installation and setting times. KLB EP 51 RAPID S is a solvent-free, 2-component epoxy resin that cures at low temperatures and, at normal temperatures, cures rapidly. Introduction of dried quartz up to 0.3mm will give a fine finish whereas dried quartz up to 3.0mm will give a coarse finish.


05/12/2011

SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

KLB PU 4009 is a high-quality, 3-component, polyurethane mortar coating that can be applied by rake and is for heavy-duty coatings that are exposed to hot water and chemicals. KLB EP 99 is a formulated, 2-component epoxy-resin binding agent that combines with aggregates to produce an economical coating for industrial and commercial flooring.


05/12/2011

LEVELLING SCREEDS « KLB Resins - Commercial flooring - Industrial flooring

The conductive property ensures protection against explosion whereby the product is especially suitable for production areas in the chemicals and pharmaceuticals industries, in laboratories, and also in other manufacturing with high exposure to chemicals.


05/12/2011

COATINGS « KLB Resins - Commercial flooring - Industrial flooring

The product will withstand forklift-truck traffic and has very good resistance to chemicals and is resistant to solvents, motor fuels, oils, mineral acids, alkalis and salts, etc. KLB EP 216 Universal is a universal, solvent-free, pigmented 2-component multi purpose binder based on epoxy resin for hard industrial coatings.


05/12/2011

PRIMERS « KLB Resins - Commercial flooring - Industrial flooring

As a variant of the proven special resin primer EP 52, the product is rapid setting and combines good adhesion and wetting properties with early readiness for over-coating after only 4 - 6 hours. KLB EP 30 is an unfilled, low viscosity and colourless epoxy-resin for producing primers, scratch coats and thick-coat smoothing compounds.