Commercial Fire Alarm Systems
All fire systems installed by us are designed, installed and commissioned to IS 3218 :1989 We provide a large selection of fire alarm systems from all the leading makers of fire detection and control equipment. From simple conventional devices to advanced analogue addressable systems. One of our dedicated and experienced fire consultants will be happy to talk you through the process, from planning through to installation, with all advice based on your individual and specific requirements. Fire Panels are at the heart of any fire system
Every device links back to the panel and communicates with it. In addressable fire systems every single device can be interrogated and analyzed from the panel.
This is very useful when system testing and fault finding. Another advantaged of this type of system is that you can isolate specific devices rather than whole zones which will allow for phased evacuation procedures which are particularly useful in large buildings. Also intelligent systems allow for phased evacuation procedures to be programmed into the system.
Conventional systems are not as intelligent and can only see faults or fires in certain zones and not a specific area as with addressable systems. Remote Terminals are also available which allow information to be distributed throughout a building.
This is typically information from the main fire panel or specific information about the area the remote terminal is situated.
This is the point of contact with a fire. Detectors can either be used to detect smoke, heat or both. When there is a change in air particles (smoke) or heat in the local environment the detector will be triggered which then sends a signal to the panel indicating a fire. There are also Beam Detectors which detect smoke in large areas such as a warehouse and Flame
Detectors which detect flames by analyzing the characteristics of flame movements.
Sounders and Beacons provide audio and visual indication that there is a fire. In most cases sounders are used.
However certain circumstances arise where sound levels may be high enough that a sounder will not be heard so a beacon is used instead. This is usually the case in plant rooms where loud machinery operate, or perhaps where a sound alarm would be inappropriate such as in a sound studio or hospital operating theatre. It is also useful in places where persons with impaired hearing may be present such as a disabled toilet.
Domestic Fire Alarm Systems
While nearly 75% of Irish homes have a smoke alarm, over 50% do not have an alarm on every level of the home, as needed. The National Safety Council advises that the average two-storey house at a minimum should have an alarm on each floor, while larger houses should have multiple alarms. Most Domestic Type Smoke or Heat detectors now come with Mains and battery backup power supply and are interconnect able
"The message is simple; by properly placing, regularly testing and maintaining your alarm, you can ensure they are working and will alert you if a fire breaks out"
We have always worked hard to achieve the highest in standards in our industry and this is demonstrated by successfully obtaining and retaining our membership of the following regulatory bodies.
We are Certified and operate under the following
Certified under the National Standards Authority of Ireland for the Installation Of Intruder alarm Systems to I.S. E.N. 50131 Standards.
The PSA (Private Security Authority) License for the installation of security systems.
SR 40 Compliant This is the recommended quality management standard for installers of Intruder Alarm, Access Control and CCTV Electronic Security Systems.
Members Of RECI (Register Of The Electrical Contractors of Ireland)
Members of AECI (Association of The Electrical Contractors of Ireland)
Our Customer Base is vast and Varied and includes the following:-
Complete Shopping Centers
Primary and Secondary Schools
We are also contracted to Individual Units Such as
Zumo Juice Bars.