Trailed Toppers | Grass & Pasture Toppers

By: Major Equipment  05/12/2011
Keywords: pasture toppers


The cutting height is set at the desired level in the farm workshop by moving the adjustable side skids to the appropriate position. There is a limit stop on the ram which controls the rear axle so, when the operator reaches the field, the machine is offset then lowered, and topping can commence.  This reduces downtime in the field and adds to the safety of the machine.

x
The Trailed Topper is afforded further protection by the rubber buffer and the high tension spring fitted to the drawbar. This system will dampen any of the shock loads the machine will encounter in the field or in transport to and from jobs.

x

The Major Trailed Topper glides easily over undulating ground with the assistance of domed dishes attached to the underneath of the blades preventing scalping. These also prevent the blades from smashing on rocks or other hard objects which may lie in the path of the machine.

   

Keywords: pasture toppers

Other products and services from Major Equipment

05/12/2011

Medium Duty Flail Mowers | Flail Mowers & Shredders

This machine is easily mounted on the tractors CAT 1 three point linkage can be offset through an optional hydraulic shift to avoid objects in the path of the machine. The MAJOR MT22 Flail Shredder is specially designed for clearing of brush & heavy grass in amenity areas and on the verges of highways.


05/12/2011

Heavy Duty Flail Mowers | Flail Mowers & Shredders

The MAJOR MT26 is specifically designed for the clearing of small trees, brush and heavy grass in amenity areas and on the verges of highways. It is also suitable for trimming grass and lighter growth, as the blades can be changed to suit the task at hand.


05/12/2011

Slashers | Grass & Pasture Toppers

The Major 601 and 605 Grass Slashers are single rotor machines ideally suited for cutting rough pastures, forestry ridges, grass verges, heathland and areas where rushes and heather prevail. The gearbox is specifically designed for this particular application as it has an extended splined spindle, to which the rotor is bolted with a castle head nut secured with a split pin.


05/12/2011

Side Mounted Toppers | Grass & Pasture Toppers

Blades are synchronised at 90 degrees to each other and overlap paths by 3", thus eliminating any uncut strips being left. Hydraulic assisted breakaway of the machine should obstacles be encountered. Absence of belts and pulleys means low maintenance and no adjustments. Shear-bolt protection incorporated into the drive system. Rubber shock absorbers between rotor gearboxes.


05/12/2011

Three Point Linkage | Grass & Pasture Toppers

Twin cut blades are synchronised at 90 degrees and overlap paths by 3", eliminating any uncut strips being left. Absence of belts and pulleys means low maintenance and no adjustments. Drive line is totally enclosed by guards for added safety. Shear-bolt protection incorporated into the drive system. Heavy Duty shaft drive system and gearboxes.


05/12/2011

Flex Wing Toppers | Grass & Pasture Toppers

88mm blade overlap to eliminate striping.