Side Mounted Toppers | Grass & Pasture Toppers

By: Major Equipment  05/12/2011
Keywords: blades, shock absorbers, Drive System

  • Heavy Duty shaft drive system and gearboxes

  • Comprehensive MAJOR guarantee

  • Rubber shock absorbers between rotor gearboxes

  • Absence of belts and pulleys means low maintenance and no adjustments

  • Blades are synchronised at 90 degrees to each other and overlap paths by 3", thus eliminating any uncut strips being left

  • Shear-bolt protection incorporated into the drive system

  • Hydraulic off-setting of the machine from the tractor seat

  • Blade tips are allowed to swing

  • Drive line is totally enclosed by guards for added safety

  • Hydraulic assisted breakaway of the machine should obstacles be encountered

  • Floatation bar system to ensure the machine follows the ground’s contours

  • Keywords: Belts And Pulleys, blades, Drive System, pasture toppers, Shaft Drive, shock absorbers,

    Other products and services from Major Equipment

    05/12/2011

    Medium Duty Flail Mowers | Flail Mowers & Shredders

    This machine is easily mounted on the tractors CAT 1 three point linkage can be offset through an optional hydraulic shift to avoid objects in the path of the machine. The MAJOR MT22 Flail Shredder is specially designed for clearing of brush & heavy grass in amenity areas and on the verges of highways.


    05/12/2011

    Heavy Duty Flail Mowers | Flail Mowers & Shredders

    The MAJOR MT26 is specifically designed for the clearing of small trees, brush and heavy grass in amenity areas and on the verges of highways. It is also suitable for trimming grass and lighter growth, as the blades can be changed to suit the task at hand.


    05/12/2011

    Slashers | Grass & Pasture Toppers

    The Major 601 and 605 Grass Slashers are single rotor machines ideally suited for cutting rough pastures, forestry ridges, grass verges, heathland and areas where rushes and heather prevail. The gearbox is specifically designed for this particular application as it has an extended splined spindle, to which the rotor is bolted with a castle head nut secured with a split pin.


    05/12/2011

    Trailed Toppers | Grass & Pasture Toppers

    There is a limit stop on the ram which controls the rear axle so, when the operator reaches the field, the machine is offset then lowered, and topping can commence. The Major Trailed Topper glides easily over undulating ground with the assistance of domed dishes attached to the underneath of the blades preventing scalping.


    05/12/2011

    Three Point Linkage | Grass & Pasture Toppers

    Twin cut blades are synchronised at 90 degrees and overlap paths by 3", eliminating any uncut strips being left. Absence of belts and pulleys means low maintenance and no adjustments. Drive line is totally enclosed by guards for added safety. Shear-bolt protection incorporated into the drive system. Heavy Duty shaft drive system and gearboxes.


    05/12/2011

    Flex Wing Toppers | Grass & Pasture Toppers

    88mm blade overlap to eliminate striping.