Seefire is a natural louvred ventilator which can provide both day to day and smoke ventilation
Apollo conforms to EN 12101-2. It provides extract ventilation for most kinds of industrial buildings. Polycarbonate versions allow the entry of natural daylight.
FCO is a natural louvred ventilator for installation into the façade that is available in a wide range of sizes, louvre options and control options.
WCO is a natural louvred ventilator which can provide both day to day and smoke ventilation, as well as weathered ventilation through its two controllable side dampers.
Coltlite is a natural glazed ventilator for installation into the façade which can provide both day to day and smoke ventilation. Its form and function make it particularly suited to commercial buildings where both large areas of glass and high performance are required.
The ACE ventilator is Colt’s answer to the Energy Performance in Buildings Directive, providing exceptionally high insulation and low air leakage.
Meteor MLS is a natural flap ventilator which can provide both day to day and smoke ventilation, as well as the entry of natural daylight. It can be configured to provide the highest possible performance from a natural ventilator.
Kameleon is a thermally broken glazed casement ventilator designed to provide smoke ventilation of corridors and stairwells in the event of a fire, as well as day to day ventilation. It has a slim profile and a discreet window appearance.
Firelight is a natural casement ventilator which is particularly suited for installation into glazing systems and which can provide both day to day and smoke ventilation. It has visible controls and may be installed at any angle.
Colt Shaft is an active fan smoke extraction system that largely frees building designers from the constraints imposed by the need for fire-fighting cores, dramatically increases the lettable or saleable space in commercial buildings and extracts smoke more quickly than passive natural ventilation systems.
Like the Colt Shaft, the Extended Corridor System is an active fan smoke extraction system that can increase the lettable or saleable space and extract smoke more quickly than passive natural ventilation systems. It is suited to means-of-escape corridors in residential buildings.
The Stairwell Ventilator is a natural louvred ventilator that is designed to provide heat and smoke exhaust ventilation in protected stairwells.
Liberator is a powered ventilator designed for the extraction of smoke and hot gases in the event of a fire.
Pressurisation systems can be designed to keep fire fighting shafts clear of smoke and can also be applied to staircases as a means of escape.
MECHANICAL EXTRACT SYSTEMS
Mechanical Extract Systems can provide higher duties than the Liberator can offer. These can comprise extract ductwork, fans and terminations.
Smokemaster SM5 is an automatic smoke curtain which prevents the movement of smoke and heat from one area to another in a fire by channelling or containing the smoke and heat. It conforms to EN 12101-1 and has a D120 rating.
Smokemaster SM-ST is a fixed smoke curtain which prevents the movement of smoke and heat from one area to another in a fire by channelling or containing the smoke and heat. It conforms to EN 12101-1 and has a D120 rating.
Fire Curtain is an automatically operating fire curtain designed to seal off an area so as to contain a fire and to prevent it from spreading to other areas.
Doorman is a smoke shaft door operator system to control the movement of smoke.
Defender is a motorised smoke damper to control the movement of smoke in a staircase or corridor without walls.