A400 Platform Lift | Wheelchair Platform Lifts | From Premier Platform Lifts

By: Premier Platform Lifts  05/12/2011
Keywords: floor, Control System, Platform Lifts

From manufacture to installation our A400 Type lift is totally flexible

A favourite among architects and engineers with its high quality and flexible construction, the A400 platform lift fits well into all types of public, private or commercial environment. This platform lift includes a free standing enclosure in your chosen RAL colour, complete with either glazed or solid panelled shaft walls. The A400 can travel a maximum of 13m over six floors or eight stops in total and the 400kg model is rated to carry 5 persons or the Part M requirement of ‘one wheelchair user plus an assistant’.

Operation

With its elegant controls and call stations incorporated within the lift shaft, the A400 platform lift is designed to give less able persons, including the visually impaired, ease of use.

Part M compliant

With a standard platform size of 1500mm x 1100mm the A400 wheelchair platform lift is fully Part M compliant.

No pit required

This lift can be installed direct to the floor, which means no expensive costs for excavation.

No machine room

The control system is incorporated within the shaft so there is no need for a separate machine room

Easy installation

From delivery to client handover the installation takes only a matter of days.

Safety first

All extreme edges of the platform have movable safety edges which immediately stop the lift if touched. The speed is limited and the control system is the hold to run type. The lift is equipped with an emergency stop and alarm device.

Finishes and options

The lift can be specified with either glazed or solid shaft walls. The standard finish is white RAL 9016 but any RAL colour is available, and numerous options can be ordered such as custom floor finishes, key controls and an autodialler.

Floor Colours

Doors

2.0m high x 0.9m wide fully glazed doors with concealed closers are supplied as standard, with automatic opening as an option. 1 hour fire rated and also E160 gas and fire resistant doors can be specified. Doors can be fitted on up to three sides of the shaft on each floor.

Technical Data

Rated load 400 kg, 500 kg
Rated speed 9m/min (0.15 m/s)
Lifting height up to 13 m
Number of floors up to 6
Control system micro computer based hold to run/ constant pressure
Drive system double V belt transmission to a rotating nut assembly. Driving nut and safety nut working on a fixed hanging screw
Power supply 400v 3 phase or 240v single phase. 16 amp starting current

Optional soft start

(220-240v 1-phase frequency converter)

(380-400v 3-phase frequency converter)

Keywords: Control System, floor, Machine Room, Platform Lift, Platform Lifts, Standard Platform, Wheelchair Platform, Wheelchair Platform Lift,

Contact Premier Platform Lifts

Email

Print this page

Share

Other products and services from Premier Platform Lifts

05/12/2011

E10 Platform Lift | Premier Platform Lifts

The new E10 is a Machine Room Less traction lift with a full internal lift car complete with sliding internal doors. On floor controls with “Simple touch” one touch car controls when lift is installed with Telescopic doors. The control system is incorporated within the shaft so there is no need for a separate machine room. Telescopic Sliding doors on cabin and at the floor in RAL or Stainless Steel.


05/12/2011

A4000S Platform Lift | Disabled Help

A visually pleasing and highly configurable solution The A4000S is a proven solution to contemporary wheelchair access requirements. Part M compliant With a standard platform size of 1100mm x 1400mm the A4000S wheelchair platform lift is fully Part M compliant. Minimal pit required There is a minimal pit requirement of 150mm, which means no expensive costs for excavation.