Ability Projects - Products - trojan

By: Ability Projects  05/12/2011
Keywords: fan coils, Fan Coil, Air Intake

The Trojan fan coil unit incorporates the same performance components as the Ability Titan and Atlas ranges and so retains their outstanding output capabilities. However, the unit construction has been streamlined and the options limited to allow simpler, ‘Fast Track’ manufacture and a consequently a more cost effective fan coil solution for your project.

The Trojan’s substantial electric enclosure is a fitted to the side of the fan coil on the same end as the coil and condensate terminations. Trojan will therefore comfortably accept any style of controller from any manufacturer. Ability will fit and test any control package you may decide upon be it free issued to us or bought by Ability.

Fan speed is affected through a tapped wound transformer, one speed switch and one ‘fine trim’ speed adjuster. The main speed switch is used to set the chosen speed and the fine trim switch is there to make further subtle adjustments. This ensures that all the fan coils in an installation give close to 100% of the required air volume even when duct runs and external resistances inevitably vary. Remember, if infinite speed adjustment is required, consider our DC/EC motor option.

Many optional extras are still available on Trojan and include; intake plenums, electric heating, condensate pumps, fresh air intake spigots and the fitting of controls.

Circular discharge spigot connections are provided off the integral discharge plenum coil in either 200mm or 250mm diameter format with a rectangular spigot connection as an option.

Remember the Titan can be supplied in DC / EC form which will save on running costs, bring infinite speed control and will double working life expectancy. Read more in the Evolution section of our product pages.

Keywords: Air Intake, Coil Unit, Fan Coil, fan coil unit, fan coils, Speed Switch,

Other products and services from Ability Projects


Ability Projects - Products - apollo

Considerable design flexibility is built into the Apollo with squared fronted or mitred discharge plenums, inlet plenum options, modulating control packages and numerous other variations. Built around another robust and proven ebm-papst fan and motor combination, the Apollo fan coil unit has been acoustically tested at the Sound Research Laboratory.


Ability Projects - Products - atlas

A horizontal chassis, 4 pipe waterside fan coil unit measuring only 235mm deep, the unit comes in a range of eight sizes and capacities and had been developed to meet consultant specifications that require a unit slightly slimmer than Ability?s standard 260mm models.


Ability Projects - Products - neptune

Remember the Neptune can be supplied in DC / EC form which will save on running costs, bring infinite speed control and will double working life expectancy. Five fan speeds are available of which three are wired to the speed switch with the usual intermediate trimming speed adjustment provided as standard. Ability?s standard vertical fan coil range is available in both 2 and 4 pipe styles and in either a chassis or a cased form.


Ability Projects - Products - titan

Common changes include adaptations to spigot positions and styles, electric heating, intake plenums, matched commissioning sets and integral VCD?s. The Titan is available in 8 model sizes giving outputs up to 12KW of sensible cooling and selectable speeds offering noise levels as low as NR25. The Condensate Tray is, as standard, angled towards the drainage point and also includes a unique design of pressure equalising plate.